一、概述
SDS系列射流式通风机系本公司运用浙江大学、北京航空航天大学的机理研究成果和借鉴日本、德国等先进技术进行研制开发的新产品，公司工程技术中心致力于将理论技术进行不断研究开发和技术创新，还与ABB、ミツヤ等国际大公司广泛交流和充分调研海内外地铁、公路、铁路隧道工程、水利大坝工程等系统，同时咨询有关地铁设计院、隧道设计院和隧道安装公司的专家，掌握了该风机的使用要求，积累了产品技术、质量要求和使用条件等丰富经验。使该风机具有效率和比A声级等优于常规普通轴流风机，其风机的品种规格选择，优化各类工程系统匹配居国内同行领先水平。
SDS系列射流风机规格自Ф
SDS系列射流式通风机采用先进的工艺取得良好的质量保证，风机外壳采用美国进口专用机床旋压翻边成形，叶轮段内壁经金加工，既保证机壳的同轴度和强度，又保证叶片径向间隙，外表经热浸镀锌处理，外形美观并防腐性能优良，风机叶片、轮毂采用日本东芝公司全数控镗、铣加工中心加工成压铸模形腔，分别在高压铸造和低压铸造机进行铝合金高（低）压铸成形。经公路隧道、铁路隧道、水利大坝工程等用户实际使用证明，该风机各项性能指标及耐腐蚀、可靠性、经济性等技术、质量要求和经济指标完全能适应各类隧道、地铁的使用。
GENERAL DESCRIPTION
SDS series jet fan is one new
product developed by Shangfeng depending on the results of mechanism research
from Beijing University of Aeronautics and Astronuatics and the advanced
technology from Japan and Germany. Enterprise technology center enjoins in
continuously research & development and technical reservation for theory.
The company establish wide communication with international enterprises, i.e.
ABB, Mitsuya, etc. and have enough research on metro, highway tunnel, railway
tunnel, dams project systems, as well as consult with the experts from the
corresponding metro design institute, tunnel design institute and tunnel
engineering enterprise. So the company knows well the application condition of
jet fan and accumulate wide experience in technology, quality and application
condition. The efficiency and A-weighted noise level of jet fan is better than
that of tradition axial fan. To select the best performance of jet fan and
optimize the various engineering systems to keep ahead in the same field at
home.
SDS jet fans comprises two groups:
unidirectional and reversible (bidirectional) axial fan. The thrust range, up
to 3500N, is covered by fans ranging from
SDS series jet fan has good quality assurance depending on the advanced technology. The casing is flowed forming by turning lathe. The inner wall of impeller is processed to make assure the alignment and strength of the casing and the radial clearance of the blades. The hot dip galvanized surface has good outlook and excellent anti-corrosive performance. The blades and hub are made of aluminum alloy by high/low pressure die-casting, casting module is made by Toshiba auto numerical control boring & milling process center. The actual application to highway tunnel, railway tunnel and dams project prove that the performance, technical and quality requirement, i.e. anti-corrosive, reliability and economics as well as economic targets completely meet with the requirement of tunnel and metro.
二、SDS系列射流式通风机代号表示
SDS SERIES JET FAN CODE
三、SDS系列射流式通风机选型参考
(一)产品使用状况说明
在地铁、公路隧道、铁路隧道等基础工程建设中，其空气质量标准、安全因素靠风机强制通排风达到要求。就通风系统而言，要长期保持良好的空气质量，否则对人体有害，如图说明。
一氧化碳对人体危害程度说明：
车辆连续地穿过隧道，使有毒气体不断增多，隧道内自然空气如不及时充分交换，必然导致对人体的危害(详见对人体影响危害时间的曲线图)。因此，必须通过强制通风，将足够的新鲜空气输入隧道内，同时排除有害气体。
总之，地铁，铁路、公路隧道使用该风机，主要为降低CO的含量到允许值，以防止汽(柴)油发动机的废气污染，如NO、NO2、NO3。在紧急状态下，必须按要求控制烟雾排放，目前国际普遍采用WHO世界卫生组织的推荐值，即NO2值替代原CO值作为通风控制的主要参数，同时还要保证车辆行驶的能见度和保证隧道内人员的逃避路径。所以，隧道通风系统必须保证事故状态下车辆和人员的安全。SDS系列风机其安全可靠性、正反转、防高温等特点均考虑了这一方面，特别在耐高温方面本公司是通过国家消防检测中心试验检测的（破坏性试验为
SELECTION
REFERENCE FOR SDS SERIES JET FAN
─ Application condition
explanation
For basis engineering construction of metro, highway
tunnel and railway tunnel, the air quality standard and safety factor will
reach the specified requirement through force ventilation and exhaust.
Ventilation system must keep good air quality, otherwise do harm to the health
of human being.
Explanation of
the harmful effects of CO on people
The continual increase of vehicles passing through
tunnels, is leading inevitably to a continuing increase of toxic gases within
these confined spaces, and thus reliance on natural air change is no longer sufficient,
and have many harmful effects on people. Please see the curve according to the
length of exposure time. It becomes, therefore, necessary to introduce a method
of force ventilation in order to remove toxic gases and create a tolerable
atmosphere within the space.
All in all, the jet fan applied to metro, railway
tunnel, highway tunnel may reduce the p.pm CO in the air to the approval values
to prevent exhaust gas pollution from gas/diesel motor, i.e. NO, NO2,
NO3. Under the state of emergency, the exhaust of smoke must be
controlled according to the requirement. NO2 value which is the
recommended value by WHO adopting in the world, is regarded as the main
parameter for ventilation control instead of CO value, as well as assure the
visibility of vehicle running and escape way of people in the tunnel.
Ventilation system in the tunnel must ensure the safety of vehicle and people
under the accident. SDS series jet fan has the characteristic of safety
reliability, reversible and anti high temperature. The fan is made complete
performance test before delivery to ensure the product quality, especially high
temperature test by State Fire Inspection Center of China (destructive test of
continuous operation within two hours under the temperature of 300 degree).
(二)隧道通风系统设计和产品选型依据
1、交通隧道原则上可分为三类：即地铁、公路隧道、铁路隧道。
2、常规运行及紧急状态下运行安全性、可靠性的先决条件是安装确保各系统之间协调并充分发挥作用的环控系统。
|
A 机械系统：通风、消防、排污 |
B 动力系统：供电、输配电、警急电力 |
|
C 灯光系统：通灯照明、局部照明、荧光指示 |
D 通信系统：电话、无线电、计算机终端 |
|
E 交通系统：灯光、信号、标志、监视 |
F 控制系统：交通状况和设备运行状况的监控 |
3、隧道通风系统可以有如下三种基本方式或可采取混合方式。
①纵向通风系统：这是最基本的通风方式。新风气流从隧道入口端流向出口端，沿隧道纵向无需安装通风管道。该通风方式一般选用可逆转射流风机。将风机安装在隧道顶部或侧面，可二个方向全面通风，以达到双向通风或控制烟雾；若隧道较长则必须附加中央送、排风竖井，竖井与大气相联，组成混合通风方式。
②全横向通风系统：沿隧道方向设置送、排风道，新风集中从风亭采集，排风集中从风塔排除，一般将送风道设置在路面以下，排风道设置在车道上部，送风道与排风道每隔一定间距设有送、排风口，在事故工况下沿隧道横断面及时排风，由此抽出烟雾。
③半横向通风系统：该系统又可区分为送风型半横向通风方式和排风型半横向通风方式，一般采用排风型半横向通风方式，新风从洞口进入，排风相似全横向通风系统。
4、隧道通风系统应考虑的因素：
|
A、工程投资 |
B、电力容量 |
C、运行费用 |
|
D、空气质量 |
E、安全因素 |
F、紧急状态下的保证措施 |
上述因素经综合后确立最优化方案
5、隧道通风系统通风机数量、机号选择的因素：
|
A、CO、NOX及烟雾浓度 |
B、车流量(车辆密度、时速) |
C、风力负荷(隧道长×宽×高) |
|
D、废气排放(车龄、数量) |
E、发生火警时的应急措施 |
|
6、隧道通风系统推力计算理论依据
①隧道通风系统推力计算依据
·入口出口阻力损失
· 隧道表面及设备等摩擦系数
·车辆摩擦系数（在最劣势的条件下计算车辆运动或活塞风效应）
·最劣势条件下洞外风速对出、入口的影响 ·隧道地形、位置（坡度、海拔）
·发生火警时所需的推力（温度、压力、时间）
②隧道压降（Pa）理论转换为射流风机所需的推力（N）
·射流式通风机的推力是风机进口与出口的动量变化，即风机推力
Ns=C10×质量流量×气流速度（N）
式中：Ns=风机静推力（ISO）N值 C1=经验修正系数
质量流量=空气密度×体积流量
·隧道中使用的射流风机与隧道内气流之间的相对速度、隧道内摩擦系数和同组平行布置影响有关，所以，射流风机的有效推力为：
Ne=
Ns×(1-Vt / Vj) C2×C3
式中：Ne=风机有效推力（N） Vt=隧道内风速（m/s）
Vj=射流速度（m/s） C2=隧道内摩擦系数
C3=同组平行布置流向损失（该损失如风机组之间相隔风机直径100倍，使射流速度不影响顺气流方向的运行条件可以不考虑）。
7、隧道通风系统应用通风机的结构特点
隧道式通风机参照上图分为带消声器和不带消声器[进出口加集(散)流器]二种规格，又分单向射流风机（SDS）和双向射流风机[SDS(R)]二种通风形式。
·风机外壳、集(散)流器、消声器、支撑脚：采用钢板数控自动焊接和机制成型，外表采用热浸镀锌或热浸镀锌后加干膜环氧树脂处理，以保证风机强度和防腐蚀。
·风机叶轮：为满足隧道通风的需要，SDS系列风机可改变叶片数和改变风机叶片角。
·消声器：消声器长度通常为风机直径的一倍，当噪声要求高时，亦可以取风机直径的二倍，消声器与风机本体采用螺栓固定。
·配套电机：SDS系列射流式通风机配套电机为鼠笼全封闭式，电机设有法兰安装盘，电机绝缘等级为H级，防腐等级为IP55，电机引出电缆可接至风机本体机壳上的接线盒，电机带有润滑油脂嘴，外接软管接至风机本体机壳上的润滑油脂嘴。
·风机可逆切换时间：在紧急状态下，射流风机正反转切换时间极为重要，SDS（R）型风机有电子式和机械式二种切换方法，可以在30秒钟内正反转切换到风机额定转速。
8、SDS系列射流式通风机试验检测
·推力试验：采用推力试验装置测得。
·高温消防试验：由国家消防装备质量监督检验中心测试检验合格。
·噪声测试：风机进出口装消声器和不装消声器均在空旷的场地上进行测试(大气风速接近0时)，风机声压级的测试为沿风机轴线45°角距风机壳10m处测得。
·风机效率：风机运行效率采用测定推力(N)及电机输入功率(kW)为定义。
该试验检测均由本公司工程技术中心（试验研究中心）严格按国家、行业有关标准进行，并经省级、国家级权威监督机构试验检测。
─ Tunnel Ventilation Systems
and Selection Basis
●There are three main types
of vehicular tunnels: Subway Tunnels (Metros), Road Tunnels, and Rail Tunnels.
●The integration of the
individual ElectroMechanical systems with well coordination interfaces is a
prerequisite for the safe overall functioning of the tunnel under normal modes
of operation and emergency conditions.
The major ElectroMechanical systems are:
* Mechanical systems: Ventilation, fire fighting,
drainage
* Electrical systems: Power (supply, distribution,
emergency)
* Lighting systems: Zones, lamps, luminance
* Communication system: Telephone, radio, computer
terminal
* Traffic system: Lights, signals, signs, monitoring
* Control system: Traffic/Equipment operation
●Tunnel ventilation can be
performed according to any of three basic methods, with hybrid solutions as
further options:
* Longitudinal ventilation: In its most basic
configuration the airflow moves from the tunnel entrance portal to the exit
portal within the tunnel, without separate ventilation ducts along the tunnel. Reversible
SDS(R) jet fans would be normally used. SDS(R) Jet fans, suspended from the top
or mounted on the tunnel walls, apply for bi-directional tunnels or for
specific modes of smoke control to fully ventilate the tunnel in either
direction. For longer longitudinally ventilated tunnels, this system must be
supplemented by central exhaust/supply ventilation stations as hybrid
solutions, connected by shafts to atmosphere.
* Fully transverse ventilation: The fully transverse
ventilation system direction employs centralized exhaust and supply ventilation
ducts along the length of the tunnel. The fresh air ducts normally collected
from the air station and runs at a lower road level while the exhaust duct runs
at a higher level. Inlet and exhaust grilles are distributed along the
ventilation ducts. Ventilation under emergency conditions normally would be
provided by the exhaust system only, thereby providing smoke extract combined
with a longitudinal velocity in the tunnel cross section.
*
Semi-transverse ventilation: The semi-transverse ventilation system can be of
the supply or exhaust type. Exhaust type semi- transverse ventilation system
normally can be used with the fresh airflow moving from the tunnel entrance
portal, similar with transverse ventilation system.
●The analysis and design of the
tunnel ventilation systems should be considered the followings:
*
Engineering investment
*
Power capacity
*
Operating expenses
*
Air quality
*
Safety
*
Measurement under the emergency conditions
The
above consideration should be complex and select the optimized project.
●The basis of selection fan quantity
and size for tunnel ventilation systems
*
CO, NOx and smoke concentrations
*
Flow volume of vehicles (traffic density, traffic speed)
*
Wind load (length of tunnel * width * height)
*
Polluted gas exhaust (age, quantity)
*
Measurement under the fire conditions
●Thrust calculation basis for tunnel
ventilation systems
●
Thrust calculation
*
Entrance and exit portal losses
*
Tunnel friction (surface + installation)
*
Friction factor of vehicle (drag or piston under the worst conditions)
*
Effects of air velocity outside the tunnel on entrance and exit portal under
the worst conditions
*
Tunnel land forms and location (gradients + altitude)
*
Emergency/fire (temperature + pressure + time)
●
The calculated tunnel pressure drop (Pa) is converted into a requirement in
thrust (N) from the installed jet fans:
The
thrust of the jet fan is the change in momentum from fan inlet to discharge,
and can be written
Fan
thrust Ns
= C1 * (mass flow) * (air velocity) (N)
where
Ns = fan static thrust (ISO) (N)
C1 = empirical correction factor
Mass
flow = (air
density) * (volumetric flow)
The
effective thrust imposed by the jet fan on the tunnel is based on the jet velocity
relative to the tunnel air velocity, also an impact by jet friction on the
tunnel wall side or by effects from other parallel jet fans installed within
the same group of fans.
The
effective fan thrust can be written:
Ne
= Ns * (1-Vt / Vj) C2 * C3
where Ne =
effective fan thrust (N)
Vt = tunnel air
velocity (m/s)
Vj = jet velocity (m/s)
C2 = installation
factor, tunnel wall
C3 = installation factor,
parallel fan distance within the group（The spacing between groups should be kept at a minimum
of 100 fan diameters in order for jet velocity not to affect the performance of
the downstream mounted fans）.
●Structural Features of Jet Fan for
Tunnel Ventilation Systems
Jet
fan has two versions, with and without silencer (with inlet or outlet
diffuser), and two ventilation types, SDS unidirectional jet fan and SDS(R) bi
directional jet fan.
●
Fan casing, diffuser, silencer, support are made of steel sheet, and hot dip
galvanized or epoxy paint top coat to improve intensity and corrosion
protection.
●
Impeller: the number of blades and blade angle is changeable to meet the
requirement of tunnel ventilation.
●
The length of the silencer normally is one fan diameter, when needed (low noise
level), can be carried at individual lengths up to 2 fan diameters. Silencers
are bolted to the base fan.
●
Motor: The motor are of squirrel cage type, totally enclosed with a flange
mounting, and are equipped with extended cables connected to a terminal box
outside the base fan casing. Insulation class H and protection classes IP 55
are applied. Motors with grease nipples can be provided with extended grease
lines to external grease nipples on the fan casing.
●
Switch time of reversible jet fan: Switch time is very important under the
emergency conditions. SDS(R) jet fan is available for electric and mechanical
methods. To switch to reversible jet fan to the rated speed of jet fan within
30 seconds.
●SDS Jet Fan Test
●
Thrust test: Thrust test device
●
High temperature fire fighting test is performed by Tianjing Fire Fighting Test
Center of Public Safety Ministry of China.
●
Sound test: Sound measurements are carried out in free field conditions at
close to zero ambient air velocity for jet fan with or without silencer. The
jet fan sound pressure level is tested at
●
Efficiency of a jet fan is defined and tested as thrust (N) and motor power
input (kW).
Jet
fan is tested for performance following the national standard and the relative
industrial standard at Shangfeng Engineering Technical Center (Test Research
Center) and tested by provincial/national authority.
四、SDS系列射流式通风机外形尺寸图
OVERALL DIMENSION OF SDS JET FAN
不带消声器 Without
silencer
|
尺寸 Dimension 机号 Size |
фD |
ФD1 |
ФD2 |
E |
H |
L1 |
L2 |
L |
A |
n-фd |
|
6.3 |
638 |
698 |
740 |
620 |
400 |
480 |
400 |
1240 |
310 |
12-ф11 |
|
7.1 |
718 |
778 |
830 |
640 |
455 |
500 |
500 |
1280 |
320 |
16-ф11 |
|
8.0 |
808 |
868 |
930 |
710 |
505 |
570 |
600 |
1410 |
350 |
16-ф11 |
|
9.0 |
908 |
978 |
1060 |
780 |
570 |
620 |
600 |
1560 |
390 |
16-ф11 |
|
10.0 |
1010 |
1080 |
1160 |
890 |
620 |
730 |
700 |
1790 |
450 |
16-ф11 |
|
11.2 |
1130 |
1200 |
1400 |
910 |
735 |
730 |
800 |
1830 |
460 |
20-ф13 |
|
12.5 |
1260 |
1330 |
1530 |
910 |
810 |
730 |
930 |
1830 |
460 |
20-ф13 |
|
14.0 |
1410 |
1480 |
1690 |
1000 |
890 |
820 |
1050 |
2000 |
500 |
20-ф13 |
|
16.0 |
1610 |
1690 |
1890 |
1200 |
990 |
1000 |
1250 |
2400 |
600 |
24-ф18 |
带消声器 With silencer
|
尺
寸 Dimension 机号 Size |
L |
фD |
ФD1 |
ФD2 |
E |
H |
L1 |
L2 |
n-фd |
|
|
1D |
2D |
|||||||||
|
6.3 |
1880 |
3140 |
638 |
698 |
838 |
620 |
460 |
480 |
400 |
12-ф11 |
|
7.1 |
2060 |
3480 |
718 |
778 |
918 |
640 |
500 |
500 |
500 |
16-ф11 |
|
8.0 |
2310 |
3910 |
808 |
868 |
1008 |
710 |
540 |
570 |
600 |
16-ф11 |
|
9.0 |
2580 |
4380 |
908 |
978 |
1108 |
780 |
600 |
620 |
600 |
16-ф11 |
|
10.0 |
2890 |
4890 |
1010 |
1080 |
1250 |
890 |
675 |
730 |
700 |
16-ф11 |
|
11.2 |
3150 |
5390 |
1130 |
1200 |
1370 |
910 |
735 |
730 |
800 |
20-ф13 |
|
12.5 |
3410 |
5910 |
1260 |
1330 |
1500 |
910 |
810 |
730 |
930 |
20-ф13 |
|
14.0 |
3800 |
6600 |
1410 |
1480 |
1650 |
1000 |
890 |
820 |
1050 |
20-ф13 |
|
16.0 |
4400 |
7600 |
1610 |
1690 |
1850 |
1200 |
990 |
1000 |
1250 |
24-ф18 |
五、SDS系列单向射流式通风机性能参数表
SDS UNIDIRECTIONAL JET FAN
PERFORMANCE DATA
|
风机型号 Fan type |
风量 Volume m3/s |
出口 风速 Outlet air velocity m/s |
电机Motor |
不带消声器 Without silencer |
带消声器With silencer |
||||||||||
|
机座号 Motor size |
功率 Motor rating kW |
风机功率 Fan power kW |
推力 Thrust N |
声压 Sound press. dB(A) |
重量 weight (kg) |
1D |
2D |
||||||||
|
推力 Thrust N |
声压 Sound press. dB(A) |
声功率 Sound power dB(A) |
重量weight (kg) |
推力 Thrust N |
声压 Sound press. dB(A) |
重量weight (kg) |
|||||||||
|
SDS-6.3-2P-4-180 |
8.1 |
26.0 |
132 |
7.5 |
6.8 |
247 |
78 |
135 |
244 |
68 |
96 |
245 |
239 |
64 |
322 |
|
SDS-6.3-2P-4-210 |
9.0 |
28.9 |
160 |
11 |
8.4 |
305 |
79 |
182 |
302 |
69 |
97 |
292 |
296 |
65 |
369 |
|
SDS-6.3-2P-4-240 |
9.9 |
31.8 |
160 |
11 |
10.1 |
369 |
80 |
182 |
365 |
70 |
98 |
292 |
358 |
66 |
369 |
|
SDS-6.3-2P-4-270 |
10.8 |
34.7 |
160 |
15 |
12.0 |
439 |
81 |
190 |
435 |
71 |
99 |
300 |
426 |
67 |
377 |
|
SDS-6.3-2P-4-300 |
11.7 |
37.5 |
160 |
15 |
14.1 |
513 |
82 |
190 |
508 |
72 |
100 |
300 |
498 |
68 |
377 |
|
SDS-6.3-2P-6-330 |
12.7 |
40.6 |
160 |
18.5 |
17.2 |
602 |
84 |
212 |
596 |
74 |
102 |
322 |
584 |
70 |
399 |
|
SDS-7.1-2P-6-180 |
12.7 |
32.0 |
160 |
15 |
13.3 |
475 |
81 |
208 |
470 |
71 |
99 |
338 |
461 |
67 |
433 |
|
SDS-7.1-2P-6-210 |
14.0 |
35.4 |
160 |
18.5 |
16.9 |
581 |
82 |
230 |
575 |
72 |
100 |
360 |
564 |
68 |
455 |
|
SDS-7.1-2P-6-240 |
15.0 |
37.9 |
180 |
22 |
20.1 |
666 |
84 |
263 |
659 |
72 |
100 |
393 |
646 |
69 |
488 |
|
SDS-7.1-2P-6-270 |
16.0 |
40.4 |
200 |
30 |
22.9 |
757 |
85 |
323 |
749 |
73 |
101 |
453 |
734 |
71 |
548 |
|
SDS-7.1-2P-6-300 |
17.0 |
42.9 |
200 |
30 |
25.8 |
853 |
86 |
323 |
845 |
75 |
103 |
453 |
828 |
72 |
548 |
|
SDS-7.1-2P-6-330 |
18.0 |
45.5 |
200 |
37 |
30.0 |
960 |
87 |
338 |
950 |
77 |
105 |
468 |
931 |
73 |
563 |
|
SDS-8-4P-6-180 |
9.3 |
18.6 |
112 |
4 |
3.1 |
204 |
66 |
138 |
202 |
56 |
84 |
310 |
198 |
52 |
435 |
|
SDS-8-4P-6-210 |
10.6 |
21.0 |
132 |
5.5 |
4.2 |
260 |
68 |
163 |
257 |
58 |
86 |
335 |
252 |
54 |
460 |
|
SDS-8-4P-6-240 |
11.8 |
23.5 |
132 |
7.5 |
5.5 |
325 |
69 |
176 |
322 |
59 |
87 |
348 |
315 |
55 |
473 |
|
SDS-8-4P-8-270 |
12.6 |
25.0 |
132 |
7.5 |
6.6 |
368 |
70 |
176 |
364 |
60 |
88 |
348 |
357 |
55 |
473 |
|
SDS-8-4P-8-300 |
13.3 |
26.5 |
160 |
11 |
7.7 |
413 |
71 |
218 |
409 |
62 |
90 |
390 |
401 |
57 |
515 |
|
SDS-8-4P-8-330 |
14.1 |
28.0 |
160 |
11 |
9.4 |
461 |
72 |
218 |
457 |
63 |
91 |
390 |
448 |
58 |
515 |
|
SDS-9-4P-6-180 |
13.0 |
20.5 |
132 |
7.5 |
5.4 |
313 |
70 |
232 |
310 |
60 |
88 |
414 |
304 |
56 |
569 |
|
SDS-9-4P-6-210 |
14.6 |
22.9 |
160 |
11 |
7.1 |
391 |
71 |
274 |
387 |
62 |
90 |
456 |
379 |
58 |
611 |
|
SDS-9-4P-6-240 |
16.1 |
25.3 |
160 |
11 |
9.0 |
477 |
72 |
274 |
472 |
63 |
91 |
456 |
463 |
59 |
611 |
|
SDS-9-4P-6-270 |
16.7 |
26.2 |
160 |
11 |
9.9 |
511 |
73 |
274 |
506 |
64 |
92 |
456 |
496 |
60 |
611 |
|
SDS-9-4P-8-300 |
18.8 |
29.5 |
160 |
15 |
13.1 |
641 |
75 |
295 |
634 |
65 |
93 |
477 |
620 |
61 |
632 |
|
SDS-9-4P-8-330 |
20.1 |
31.6 |
180 |
18.5 |
16.9 |
744 |
76 |
333 |
736 |
67 |
95 |
515 |
722 |
63 |
670 |
|
SDS-9-4P-8-350 |
21.1 |
33.2 |
180 |
22 |
19.2 |
870 |
76 |
340 |
860 |
67 |
95 |
523 |
852 |
63 |
680 |
|
SDS-10-4P-6-180 |
17.7 |
22.5 |
160 |
11 |
9.8 |
466 |
72 |
306 |
461 |
63 |
91 |
518 |
452 |
60 |
703 |
|
SDS-10-4P-6-210 |
19.6 |
25.0 |
160 |
15 |
11.7 |
575 |
73 |
327 |
569 |
64 |
92 |
539 |
558 |
61 |
724 |
|
SDS-10-4P-6-240 |
21.2 |
27.0 |
160 |
15 |
13.9 |
670 |
75 |
327 |
664 |
66 |
94 |
539 |
650 |
63 |
724 |
|
SDS-10-4P-8-270 |
23.2 |
29.5 |
180 |
18.5 |
17.1 |
800 |
77 |
365 |
792 |
67 |
95 |
577 |
776 |
64 |
762 |
|
SDS-10-4P-8-300 |
24.3 |
31.0 |
180 |
22 |
21.2 |
884 |
78 |
373 |
875 |
69 |
97 |
585 |
857 |
65 |
770 |
|
SDS-10-4P-8-330 |
26.9 |
34.2 |
200 |
30 |
27.5 |
1076 |
79 |
453 |
1065 |
70 |
98 |
665 |
1044 |
66 |
850 |
|
SDS-11.2-4P-6-180 |
24.8 |
25.2 |
180 |
18.5 |
17.3 |
744 |
77 |
427 |
736 |
68 |
96 |
639 |
722 |
65 |
824 |
|
SDS-11.2-4P-6-210 |
27.3 |
27.7 |
180 |
22 |
20.5 |
899 |
78 |
435 |
890 |
69 |
97 |
647 |
872 |
66 |
832 |
|
SDS-11.2-4P-6-240 |
30.5 |
31.1 |
200 |
30 |
25.6 |
1120 |
80 |
515 |
1095 |
71 |
99 |
727 |
1073 |
68 |
912 |
|
SDS-11.2-4P-6-270 |
32.3 |
32.8 |
225 |
37 |
30.3 |
1260 |
80 |
529 |
1247 |
71 |
99 |
741 |
1223 |
69 |
926 |
|
SDS-11.2-4P-6-300 |
34.9 |
35.4 |
225 |
45 |
38.4 |
1468 |
81 |
565 |
1453 |
72 |
100 |
777 |
1424 |
69 |
962 |
SDS系列单向射流式通风机性能参数表
SDS
UNIDIRECTIONAL JET FAN PERFORMANCE DATA
|
风机型号 Fan type |
风量 Volume m3/s |
出口 风速 Outlet air velocity m/s |
电机Motor |
不带消声器 Without silencer |
带消声器With silencer |
||||||||||
|
机座号 Motor size |
功率 Motor rating kW |
风机功率 Fan power kW |
推力 Thrust N |
声压 Sound press. dB(A) |
重量 weight (kg) |
1D |
2D |
||||||||
|
推力 Thrust N |
声压 Sound press. dB(A) |
声功率 Sound power dB(A) |
重量weight (kg) |
推力 Thrust N |
声压 Sound press. dB(A) |
重量weight (kg) |
|||||||||
|
SDS-11.2-4P-8-330 |
37.4 |
38.0 |
250 |
55 |
46.2 |
1691 |
83 |
672 |
1674 |
73 |
101 |
884 |
1641 |
70 |
1069 |
|
SDS-12.5-4P-6-180 |
35.0 |
28.5 |
225 |
37 |
29.8 |
1185 |
82 |
574 |
1173 |
72 |
100 |
852 |
1150 |
70 |
1137 |
|
SDS-12.5-4P-6-210 |
38.3 |
31.2 |
225 |
37 |
34.5 |
1420 |
82 |
574 |
1406 |
73 |
101 |
852 |
1378 |
70 |
1137 |
|
SDS-12.5-4P-6-240 |
41.6 |
33.9 |
225 |
45 |
41.2 |
1677 |
83 |
610 |
1660 |
74 |
102 |
888 |
1627 |
71 |
1173 |
|
SDS-12.5-4P-6-270 |
45.2 |
36.8 |
250 |
55 |
50.8 |
1976 |
84 |
717 |
1956 |
76 |
104 |
995 |
1917 |
73 |
1280 |
|
SDS-12.5-4P-8-300 |
48.5 |
39.5 |
280 |
75 |
66.4 |
2276 |
85 |
852 |
2254 |
77 |
105 |
1130 |
2208 |
74 |
1415 |
|
SDS-12.5-4P-8-330 |
51.5 |
42.0 |
280 |
90 |
81.9 |
2574 |
86 |
957 |
2548 |
78 |
106 |
1235 |
2497 |
74 |
1520 |
|
SDS-12.5-6P-6-180 |
23.1 |
18.8 |
160 |
11 |
8.4 |
516 |
69 |
437 |
510 |
60 |
88 |
715 |
500 |
57 |
1000 |
|
SDS-12.5-6P-6-210 |
25.4 |
20.7 |
180 |
15 |
10.7 |
625 |
70 |
485 |
619 |
61 |
89 |
763 |
607 |
58 |
1048 |
|
SDS-12.5-6P-6-240 |
27.6 |
22.5 |
180 |
15 |
12.3 |
739 |
71 |
485 |
731 |
63 |
91 |
763 |
717 |
60 |
1048 |
|
SDS-12.5-6P-8-270 |
29.8 |
24.3 |
200 |
18.5 |
15.6 |
861 |
72 |
510 |
853 |
64 |
92 |
788 |
836 |
61 |
1073 |
|
SDS-12.5-6P-8-300 |
32.2 |
26.2 |
200 |
22 |
18.9 |
1001 |
73 |
540 |
991 |
64 |
92 |
818 |
972 |
61 |
1103 |
|
SDS-12.5-6P-8-330 |
34.5 |
28.1 |
225 |
30 |
23.7 |
1152 |
74 |
582 |
1140 |
66 |
94 |
860 |
1118 |
63 |
1145 |
|
SDS-14-6P-6-180 |
33.6 |
21.8 |
200 |
18.5 |
16.5 |
870 |
73 |
656 |
861 |
64 |
92 |
947 |
844 |
61 |
1292 |
|
SDS-14-6P-6-210 |
36.8 |
23.9 |
200 |
22 |
18.1 |
1045 |
74 |
686 |
1035 |
65 |
93 |
977 |
1014 |
62 |
1322 |
|
SDS-14-6P-6-240 |
39.9 |
25.9 |
225 |
30 |
24.8 |
1228 |
75 |
728 |
1215 |
66 |
94 |
1019 |
1191 |
64 |
1364 |
|
SDS-14-6P-8-270 |
43.1 |
28.0 |
250 |
37 |
30.2 |
1435 |
76 |
844 |
1420 |
68 |
96 |
1135 |
1392 |
65 |
1480 |
|
SDS-14-6P-8-300 |
46.3 |
30.1 |
280 |
45 |
35.5 |
1658 |
77 |
972 |
1642 |
68 |
96 |
1263 |
1609 |
66 |
1608 |
|
SDS-14-6P-8-330 |
49.6 |
32.2 |
280 |
55 |
45.7 |
1898 |
78 |
1031 |
1879 |
69 |
97 |
1322 |
1841 |
67 |
1667 |
|
SDS-14-8P-6-180 |
25.4 |
16.5 |
160 |
7.5 |
6.1 |
498 |
64 |
581 |
493 |
55 |
83 |
872 |
483 |
52 |
1217 |
|
SDS-14-8P-6-210 |
27.7 |
18.0 |
180 |
11 |
7.7 |
593 |
65 |
620 |
587 |
57 |
85 |
911 |
575 |
54 |
1256 |
|
SDS-14-8P-6-240 |
30.0 |
19.5 |
200 |
15 |
9.9 |
696 |
66 |
686 |
689 |
58 |
86 |
977 |
675 |
55 |
1322 |
|
SDS-14-8P-8-270 |
32.5 |
21.1 |
225 |
15 |
13.5 |
815 |
68 |
686 |
807 |
59 |
87 |
977 |
790 |
57 |
1322 |
|
SDS-14-8P-8-300 |
34.6 |
22.5 |
225 |
18.5 |
15.1 |
926 |
68 |
702 |
917 |
59 |
87 |
993 |
899 |
57 |
1338 |
|
SDS-14-8P-8-330 |
37.1 |
24.1 |
250 |
22 |
19.5 |
1063 |
69 |
728 |
1052 |
61 |
89 |
1019 |
1031 |
58 |
1364 |
|
SDS-16-6P-6-180 |
47.2 |
23.5 |
225 |
30 |
24.1 |
1320 |
77 |
892 |
1307 |
68 |
96 |
1240 |
1281 |
66 |
1680 |
|
SDS-16-6P-6-210 |
52.1 |
25.9 |
250 |
37 |
32.5 |
1603 |
78 |
1008 |
1587 |
69 |
97 |
1356 |
1556 |
67 |
1796 |
|
SDS-16-6P-6-240 |
57.1 |
28.4 |
280 |
55 |
45.6 |
1928 |
80 |
1195 |
1909 |
71 |
99 |
1543 |
1870 |
68 |
1983 |
|
SDS-16-6P-6-270 |
61.9 |
30.8 |
315 |
75 |
56.2 |
2268 |
81 |
1590 |
2245 |
73 |
101 |
1938 |
2200 |
70 |
2378 |
|
SDS-16-6P-8-300 |
67.0 |
33.3 |
315 |
75 |
65.7 |
2651 |
82 |
1590 |
2624 |
73 |
101 |
1938 |
2572 |
71 |
2378 |
|
SDS-16-6P-8-330 |
71.8 |
35.7 |
315 |
90 |
83.5 |
3046 |
83 |
1680 |
3016 |
75 |
103 |
2028 |
2956 |
72 |
2468 |
|
SDS-16-8P-6-180 |
35.6 |
17.7 |
200 |
15 |
10.8 |
749 |
69 |
850 |
741 |
61 |
89 |
1198 |
727 |
58 |
1638 |
|
SDS-16-8P-6-210 |
39.2 |
19.5 |
225 |
15 |
13.2 |
909 |
69 |
850 |
900 |
61 |
89 |
1198 |
882 |
58 |
1638 |
|
SDS-16-8P-6-240 |
42.8 |
21.3 |
225 |
22 |
18.1 |
1084 |
71 |
892 |
1074 |
63 |
91 |
1240 |
1052 |
61 |
1680 |
|
SDS-16-8P-6-270 |
46.6 |
23.2 |
250 |
30 |
24.2 |
1287 |
72 |
1005 |
1274 |
64 |
92 |
1353 |
1248 |
62 |
1793 |
|
SDS-16-8P-8-300 |
50.3 |
25.0 |
280 |
37 |
32.5 |
1494 |
73 |
1120 |
1479 |
65 |
93 |
1468 |
1449 |
63 |
1908 |
六、SDS(R)系列双向射流式通风机性能参数表
SDS
BIDIRECTIONAL JET FAN PERFORMANCE DATA
|
风机型号 Fan type |
风量 Volume m3/s |
出口 风速 Outlet air velocity m/s |
电机Motor |
不带消声器 Without silencer |
带消声器With silencer |
||||||||||
|
机座号 Motor size |
功率 Motor rating kW |
风机功率 Fan power kW |
推力 Thrust N |
声压 Sound press. dB(A) |
重量 weight (kg) |
1D |
2D |
||||||||
|
推力 Thrust N |
声压 Sound press. dB(A) |
声功率 Sound power dB(A) |
重量weight (kg) |
推力 Thrust N |
声压 Sound press. dB(A) |
重量weight (kg) |
|||||||||
|
SDS-6.3-2P-4-180 |
7.9 |
25.2 |
132 |
7.5 |
6.90 |
232 |
79 |
135 |
230 |
70 |
98 |
245 |
225 |
66 |
322 |
|
SDS-6.3-2P-4-210 |
8.7 |
28.0 |
160 |
11 |
8.7 |
287 |
80 |
182 |
284 |
71 |
99 |
292 |
278 |
67 |
369 |
|
SDS-6.3-2P-4-240 |
9.6 |
30.8 |
160 |
11 |
10.4 |
347 |
80 |
182 |
343 |
71 |
99 |
292 |
337 |
67 |
369 |
|
SDS-6.3-2P-4-270 |
10.5 |
33.7 |
160 |
15 |
12.4 |
413 |
81 |
190 |
409 |
72 |
100 |
300 |
401 |
68 |
377 |
|
SDS-6.3-2P-4-300 |
11.3 |
36.4 |
160 |
15 |
14.3 |
482 |
82 |
190 |
478 |
73 |
101 |
300 |
468 |
69 |
377 |
|
SDS-6.3-2P-6-330 |
12.3 |
39.4 |
160 |
18.5 |
17.7 |
566 |
83 |
212 |
560 |
74 |
102 |
322 |
549 |
70 |
399 |
|
SDS-7.1-2P-6-180 |
12.3 |
31.0 |
160 |
15 |
13.7 |
446 |
83 |
208 |
442 |
73 |
101 |
338 |
433 |
70 |
433 |
|
SDS-7.1-2P-6-210 |
13.6 |
34.3 |
160 |
18.5 |
17.4 |
546 |
84 |
230 |
541 |
74 |
102 |
360 |
530 |
71 |
455 |
|
SDS-7.1-2P-6-240 |
14.6 |
36.8 |
180 |
22 |
20.7 |
626 |
85 |
263 |
620 |
75 |
103 |
393 |
607 |
73 |
488 |
|
SDS-7.1-2P-6-270 |
15.5 |
39.2 |
200 |
30 |
23.6 |
711 |
85 |
323 |
704 |
76 |
104 |
453 |
690 |
73 |
548 |
|
SDS-7.1-2P-6-300 |
16.5 |
41.6 |
200 |
30 |
26.6 |
802 |
86 |
323 |
794 |
77 |
105 |
453 |
778 |
74 |
548 |
|
SDS-7.1-2P-6-330 |
17.5 |
44.1 |
200 |
37 |
30.9 |
902 |
87 |
338 |
893 |
78 |
106 |
468 |
875 |
75 |
563 |
|
SDS-8-4P-6-180 |
9.1 |
18.0 |
112 |
4.0 |
3.2 |
191 |
66 |
138 |
189 |
56 |
84 |
310 |
186 |
52 |
435 |
|
SDS-8-4P-6-210 |
10.2 |
20.4 |
132 |
5.5 |
4.3 |
244 |
68 |
163 |
242 |
58 |
86 |
335 |
237 |
54 |
460 |
|
SDS-8-4P-6-240 |
11.5 |
22.8 |
132 |
7.5 |
5.7 |
306 |
69 |
176 |
302 |
59 |
87 |
348 |
296 |
56 |
473 |
|
SDS-8-4P-8-270 |
12.2 |
24.3 |
132 |
7.5 |
6.8 |
346 |
70 |
176 |
342 |
60 |
88 |
348 |
335 |
57 |
473 |
|
SDS-8-4P-8-300 |
12.9 |
25.7 |
160 |
11 |
7.9 |
388 |
71 |
218 |
385 |
62 |
90 |
390 |
377 |
58 |
515 |
|
SDS-8-4P-8-330 |
13.7 |
27.2 |
160 |
11 |
9.7 |
434 |
72 |
218 |
429 |
62 |
90 |
390 |
421 |
59 |
515 |
|
SDS-9-4P-6-180 |
12.7 |
19.9 |
132 |
7.5 |
5.6 |
294 |
70 |
232 |
291 |
60 |
88 |
414 |
285 |
57 |
569 |
|
SDS-9-4P-6-210 |
14.1 |
22.2 |
160 |
11 |
7.3 |
367 |
71 |
274 |
364 |
61 |
89 |
456 |
356 |
57 |
611 |
|
SDS-9-4P-6-240 |
15.6 |
24.5 |
160 |
11 |
9.3 |
448 |
73 |
274 |
444 |
64 |
92 |
456 |
435 |
60 |
611 |
|
SDS-9-4P-6-270 |
16.2 |
25.4 |
160 |
11 |
10.2 |
481 |
73 |
274 |
476 |
64 |
92 |
456 |
466 |
61 |
611 |
|
SDS-9-4P-8-300 |
18.7 |
29.4 |
160 |
15 |
13.5 |
636 |
74 |
295 |
629 |
65 |
93 |
477 |
616 |
61 |
632 |
|
SDS-9-4P-8-330 |
19.5 |
30.7 |
180 |
18.5 |
17.4 |
699 |
75 |
333 |
692 |
66 |
94 |
515 |
678 |
63 |
670 |
|
SDS-9-4P-8-350 |
20.3 |
33.2 |
180 |
22 |
18.9 |
725 |
75 |
343 |
700 |
66 |
94 |
525 |
530 |
63 |
680 |
|
SDS-10-4P-6-180 |
17.1 |
21.8 |
160 |
11 |
10.1 |
438 |
74 |
306 |
433 |
64 |
92 |
518 |
425 |
61 |
703 |
|
SDS-10-4P-6-210 |
19.0 |
24.3 |
160 |
15 |
12.1 |
540 |
75 |
327 |
535 |
65 |
93 |
539 |
524 |
62 |
724 |
|
SDS-10-4P-6-240 |
20.6 |
26.2 |
160 |
15 |
14.3 |
630 |
76 |
327 |
624 |
67 |
95 |
539 |
611 |
64 |
724 |
|
SDS-10-4P-8-270 |
22.5 |
28.6 |
180 |
18.5 |
17.6 |
752 |
77 |
365 |
745 |
68 |
96 |
577 |
730 |
65 |
762 |
|
SDS-10-4P-8-300 |
23.6 |
30.1 |
180 |
22 |
21.5 |
841 |
78 |
373 |
829 |
70 |
98 |
585 |
815 |
66 |
770 |
|
SDS-10-4P-8-330 |
26.1 |
33.2 |
200 |
30 |
28.3 |
1011 |
79 |
453 |
1001 |
70 |
98 |
665 |
981 |
66 |
850 |
|
SDS-11.2-4P-6-180 |
24.1 |
24.4 |
180 |
18.5 |
17.8 |
699 |
78 |
427 |
682 |
69 |
97 |
639 |
668 |
65 |
824 |
|
SDS-11.2-4P-6-210 |
26.5 |
26.9 |
180 |
22 |
21.1 |
845 |
79 |
435 |
824 |
70 |
98 |
647 |
807 |
67 |
832 |
|
SDS-11.2-4P-6-240 |
30.2 |
30.7 |
200 |
30 |
25.3 |
1080 |
80 |
515 |
1055 |
71 |
99 |
727 |
1035 |
68 |
912 |
|
SDS-11.2-4P-6-270 |
32.2 |
32.7 |
225 |
37 |
31.2 |
1220 |
81 |
529 |
1211 |
72 |
100 |
741 |
1190 |
69 |
926 |
|
SDS-11.2-4P-6-300 |
33.8 |
34.3 |
225 |
45 |
39.6 |
1380 |
82 |
565 |
1345 |
72 |
102 |
777 |
1318 |
70 |
962 |
SDS(R)系列双向射流式通风机性能参数表
SDS
BIDIRECTIONAL JET FAN PERFORMANCE DATA
|
风机型号 Fan type |
风量 Volume m3/s |
出口 风速 Outlet air velocity m/s |
电机Motor |
不带消声器 Without silencer |
带消声器With silencer |
||||||||||
|
机座号 Motor size |
功率 Motor rating kW |
风机功率 Fan power kW |
推力 Thrust N |
声压 Sound press. dB(A) |
重量 weight (kg) |
1D |
2D |
||||||||
|
推力 Thrust N |
声压 Sound press. dB(A) |
声功率 Sound power dB(A) |
重量weight (kg) |
推力 Thrust N |
声压 Sound press. dB(A) |
重量weight (kg) |
|||||||||
|
SDS-11.2-4P-8-330 |
36.3 |
36.9 |
250 |
55 |
47.6 |
1590 |
83 |
672 |
1550 |
72 |
103 |
884 |
1526 |
71 |
1069 |
|
SDS-12.5-4P-6-180 |
33.9 |
27.6 |
225 |
30 |
30.7 |
1114 |
82 |
574 |
1086 |
73 |
101 |
852 |
1064 |
70 |
1137 |
|
SDS-12.5-4P-6-210 |
37.1 |
30.3 |
225 |
37 |
35.5 |
1335 |
82 |
574 |
1302 |
73 |
101 |
852 |
1276 |
70 |
1137 |
|
SDS-12.5-4P-6-240 |
40.4 |
32.9 |
225 |
45 |
42.4 |
1576 |
83 |
610 |
1537 |
75 |
103 |
888 |
1506 |
72 |
1173 |
|
SDS-12.5-4P-6-270 |
43.8 |
35.7 |
250 |
55 |
52.3 |
1857 |
84 |
717 |
1811 |
75 |
103 |
995 |
1775 |
72 |
1280 |
|
SDS-12.5-4P-8-300 |
47.0 |
38.3 |
280 |
75 |
68.4 |
2140 |
85 |
852 |
2086 |
76 |
104 |
1130 |
2045 |
74 |
1415 |
|
SDS-12.5-4P-8-330 |
50.0 |
40.7 |
280 |
90 |
84.4 |
2419 |
86 |
957 |
2359 |
78 |
106 |
1235 |
2312 |
75 |
1520 |
|
SDS-12.5-6P-6-180 |
22.4 |
18.2 |
160 |
11 |
8.7 |
485 |
69 |
437 |
473 |
60 |
88 |
715 |
463 |
57 |
1000 |
|
SDS-12.5-6P-6-210 |
24.6 |
20.1 |
180 |
15 |
11.0 |
588 |
70 |
485 |
573 |
61 |
89 |
763 |
561 |
58 |
1048 |
|
SDS-12.5-6P-6-240 |
26.8 |
21.8 |
180 |
15 |
12.7 |
694 |
71 |
485 |
677 |
62 |
90 |
763 |
663 |
59 |
1048 |
|
SDS-12.5-6P-8-270 |
28.9 |
23.6 |
200 |
18.5 |
16.1 |
810 |
72 |
510 |
790 |
63 |
91 |
788 |
774 |
61 |
1073 |
|
SDS-12.5-6P-8-300 |
31.2 |
25.4 |
200 |
22 |
19.5 |
941 |
73 |
540 |
918 |
64 |
92 |
818 |
899 |
63 |
1103 |
|
SDS-12.5-6P-8-330 |
33.4 |
27.3 |
225 |
30 |
24.4 |
1083 |
74 |
582 |
1056 |
65 |
93 |
860 |
1035 |
63 |
1145 |
|
SDS-14-6P-6-180 |
32.6 |
21.1 |
200 |
18.5 |
16.9 |
818 |
74 |
656 |
797 |
65 |
93 |
947 |
781 |
62 |
1292 |
|
SDS-14-6P-6-210 |
35.7 |
23.2 |
200 |
22 |
18.6 |
983 |
74 |
686 |
958 |
65 |
93 |
977 |
939 |
62 |
1322 |
|
SDS-14-6P-6-240 |
38.7 |
25.1 |
225 |
30 |
25.5 |
1154 |
75 |
728 |
1125 |
66 |
94 |
1019 |
1103 |
64 |
1364 |
|
SDS-14-6P-8-270 |
41.8 |
27.2 |
250 |
37 |
31.1 |
1349 |
76 |
844 |
1315 |
67 |
95 |
1135 |
1289 |
65 |
1480 |
|
SDS-14-6P-8-300 |
44.9 |
29.2 |
280 |
45 |
36.6 |
1559 |
77 |
972 |
1520 |
68 |
96 |
1263 |
1489 |
66 |
1608 |
|
SDS-14-6P-8-330 |
48.1 |
31.2 |
280 |
55 |
47.1 |
1784 |
78 |
1031 |
1739 |
70 |
98 |
1322 |
1704 |
67 |
1667 |
|
SDS-14-8P-6-180 |
24.6 |
16.0 |
160 |
7.5 |
6.3 |
468 |
64 |
581 |
457 |
55 |
83 |
872 |
448 |
52 |
1217 |
|
SDS-14-8P-6-210 |
26.9 |
17.5 |
180 |
11 |
7.9 |
557 |
65 |
620 |
543 |
56 |
84 |
911 |
533 |
53 |
1256 |
|
SDS-14-8P-6-240 |
29.1 |
18.9 |
200 |
15 |
10.2 |
654 |
67 |
686 |
683 |
58 |
86 |
977 |
625 |
56 |
1322 |
|
SDS-14-8P-8-270 |
31.5 |
20.5 |
225 |
15 |
13.9 |
766 |
68 |
686 |
747 |
59 |
87 |
977 |
732 |
57 |
1322 |
|
SDS-14-8P-8-300 |
33.6 |
21.8 |
225 |
18.5 |
15.6 |
871 |
69 |
702 |
849 |
60 |
88 |
993 |
832 |
58 |
1338 |
|
SDS-14-8P-8-330 |
36.0 |
23.4 |
250 |
22 |
20.0 |
999 |
70 |
728 |
974 |
61 |
89 |
1018 |
955 |
58 |
1364 |
|
SDS-16-6P-6-180 |
45.8 |
22.8 |
225 |
30 |
24.8 |
1241 |
77 |
892 |
1210 |
68 |
96 |
1240 |
1186 |
65 |
1680 |
|
SDS-16-6P-6-210 |
50.5 |
25.1 |
250 |
37 |
33.5 |
1507 |
78 |
1008 |
1470 |
69 |
97 |
1356 |
1440 |
66 |
1796 |
|
SDS-16-6P-6-240 |
55.4 |
27.5 |
280 |
55 |
47.0 |
1812 |
80 |
1195 |
1767 |
71 |
99 |
1543 |
1732 |
68 |
1983 |
|
SDS-16-6P-6-270 |
60.1 |
29.9 |
315 |
75 |
57.9 |
2132 |
81 |
1590 |
2078 |
71 |
99 |
1938 |
2037 |
69 |
2378 |
|
SDS-16-6P-8-300 |
64.9 |
32.3 |
315 |
75 |
67.7 |
2492 |
81 |
1590 |
2429 |
72 |
100 |
1938 |
2381 |
70 |
2378 |
|
SDS-16-6P-8-330 |
69.6 |
34.6 |
315 |
90 |
86.0 |
2864 |
83 |
1680 |
2792 |
74 |
102 |
2028 |
2736 |
71 |
2468 |
|
SDS-16-8P-6-180 |
34.5 |
17.2 |
200 |
15 |
11.1 |
704 |
69 |
850 |
686 |
60 |
88 |
1198 |
673 |
57 |
1638 |
|
SDS-16-8P-6-210 |
38.0 |
18.9 |
225 |
15 |
13.6 |
854 |
70 |
850 |
833 |
61 |
89 |
1198 |
816 |
58 |
1638 |
|
SDS-16-8P-6-240 |
41.5 |
20.7 |
225 |
22 |
18.5 |
1019 |
71 |
892 |
994 |
63 |
91 |
1240 |
974 |
60 |
1680 |
|
SDS-16-8P-6-270 |
45.2 |
22.5 |
250 |
30 |
24.9 |
1209 |
72 |
1005 |
1179 |
63 |
91 |
1353 |
1156 |
61 |
1793 |
|
SDS-16-8P-8-300 |
48.8 |
24.3 |
280 |
37 |
33.5 |
1404 |
73 |
1120 |
1369 |
65 |
93 |
1468 |
1342 |
62 |
1908 |
上虞市风机销售有限公司
SHANGYUSHI FAN SALES CO.,LTD.
地址：中国·浙江上虞上浦工业开发区
Add:
Shangyu ShangPu Industry developing zone，Zhejiang China
电话（Tel）： 0575-82366353 82366656
传真（Fax）：0575-82362278 售后服务热线：0575-82367106
邮编（PC）：312375
E-mail:fengji@syfengji.cn